R
RH.Campbell
Anyone seen this ? During another of my endless ADT takeovers, I entered
programming mode, software defaulted and reprogrammed the panel as per
normal. However, once back in service, the panel will show troubles
properly, but it will not beep along with the normal trouble light
indication. The correct software switch is off in software. The chimes work
OK, so the keypad is not in mute mode.
I hope I don't have to do the usual "power down and back up"(when you don't
know what else is the problem with DSC) to bring back the trouble beep.
Any ideas?
R.H.Campbell
Home Security Metal Products
Ottawa, Ontario, Canada
www.homemetal.com
programming mode, software defaulted and reprogrammed the panel as per
normal. However, once back in service, the panel will show troubles
properly, but it will not beep along with the normal trouble light
indication. The correct software switch is off in software. The chimes work
OK, so the keypad is not in mute mode.
I hope I don't have to do the usual "power down and back up"(when you don't
know what else is the problem with DSC) to bring back the trouble beep.
Any ideas?
R.H.Campbell
Home Security Metal Products
Ottawa, Ontario, Canada
www.homemetal.com