Maker Pro
Maker Pro

Transistor level implementation of comparator with CMOS technology

J

John

Hello People...

I am interested to design a full custom comparator in IC form using
CMOS technology. Thec technology available is lambda. Its one-bit
comparator where two number are required to be compared and there are
two input each form the current and previous stage. Also any one can
advise how can this design be expanded to become comparator for two
8-bit numbers.

Anyone with answer plz advice. Also kindly give advice on usefull
resourse, books, websites etc.

Thanks in advance...

Regards
John
 
R

Rich Grise

Hello People...

I am interested to design a full custom comparator in IC form using
CMOS technology. Thec technology available is lambda. Its one-bit
comparator where two number are required to be compared and there are
two input each form the current and previous stage. Also any one can
advise how can this design be expanded to become comparator for two
8-bit numbers.

Anyone with answer plz advice. Also kindly give advice on usefull
resourse, books, websites etc.

Thanks in advance...

Do you mean that you want to design and build one of these from scratch?
On a chip?
http://focus.ti.com/docs/prod/folders/print/cd4063b.html

Good Luck!
Rich
 
J

John

Thanks a bunch rich... that was helpful... well I will design it only
not gona implement it... its a practice exercise.. I welcome more
support and info from other members thank a lot...
 
Top