Maker Pro
Maker Pro

Today's Salvage Haul

A few electrolytic caps, ceramic caps, some LEDs, a switch and SPST push buttons, and finally, a few transistors, one 15v regulator in TO-92 package and an OP amp.

Ok...I was bored.

mHRxrE50KZxwhe36BYG1l-ANGU9Mnv0luRuTOGeS00_nBh0TCPmhRTH1wuneragQlbSOqwdjg9vC77aBUJUlgrcMsd5DpzgGcfdvgDzE_T8r0C0bTQHxkLW9jIYaxKOdfDhnNH6dVyDk465sC-_w1lrcKZY8esZMJ3fBVmqIKJkq57L4cl78tnQT-TV9a1mFkLd3ooDMf5_1b9xokmzlWG7scpltzlB5XPyIJry0AD-iC4yP5a_8RLJG_zMbBF-DGZU38kkUbWaXMBAcrzMv1ThmS-ThdZWHBOjESpMdKb4ePUzgj_M-O1nY0F2-NXuz908YppfhPKTGhyo53oH9nkNnR019VFRSHtU_LMOLmlxLk86-zrCFsvd6TQ36yT1ZZK7mexYC3UTsvrm-2A2GWMOsxdNT7C-AiraY1NwKdzu1Q4VNDKL3UlGTCg0dcHNPesGy9a-9vP0z54DgyRK7H8099WzGopAy5bsRqG94WGFe8Ri_5XFmPGs1zfwN6yapDX0Fb4_1sK6ewDCK_UjYm0fZN-4SAFBaCM5pE0iXgG9gj3CPGu720CQpGdM-NvTsGjNEAe8js1_qamtl4_l402gxTtXFzMM=w1560-h878-no
 
Last edited by a moderator:

hevans1944

Hop - AC8NS
I really love getting (even inexpensive) parts for no investment other than sweat equity. Now go have some (more) fun!
 
I just love my blue solder sucker. I have almost worn it out. The tip is getting a bit large but that is ok for when I have to desolder a large leaded component. I like to use braid on DIP ICs that have been soldered on both sides of the board. That plus some flux = a good time!!!
 
Top