Maker Pro
Maker Pro

the prettyLow Drain Flasher circuit with BJT

Here I present a very low drain circuit .

This is led flasher at .7sec delay ... takes .89mA

Please confirm if my measurement is correct .

Feature :
works from .7V also
just two value resistor cover wide vcc

for .7 - 3v keep Rx 220E
and for 5-16V Rx is 47k
 

Attachments

  • LOwD_flasher.png
    LOwD_flasher.png
    22 KB · Views: 114
Explain how the "LEAKY" 47 ufd electrolytic, being inserted into the power supply input line, to feed the circuitry, fits into the grand scheme of the units design plan ?
 
Explain how the "LEAKY" 47 ufd electrolytic, being inserted into the power supply input line, to feed the circuitry, fits into the grand scheme of the units design plan ?
great catch.. that one helps it to start Off, else needs a dab of voltage to make it , probably a diode in series will help cut the leak ?
 
Top