Maker Pro
Maker Pro

Television Strange Picture behaviour

J

JWBH

When switched on the television picture drains colour from the edges and
then 'implodes' in on itself in about a second. Then it turns itself off and
a couple of seconds turns itself on again. It then continually repeats this
cycle. Picture>draining edges>implosion>turns off and then turns on again;
until the set is completely turned off.

Its a Sony KV-29F1U and is about twelve years old. Grateful for any
advice please.
 
When switched on the television picture drains colour from the edges and
then 'implodes' in on itself in about a second. Then it turns itself off and
a couple of seconds turns itself on again. It then continually repeats this
cycle. Picture>draining edges>implosion>turns off and then turns on again;
until the set is completely turned off.

Its a Sony KV-29F1U and is about twelve years old. Grateful for any
advice please.

It almost sounds like a degauss cycle. Try disconnecting the coils and
see what happens. Lenny Stein, Barlen Electronics.
 
Top