Maker Pro
Maker Pro

Tektronix Monitor issues. (model TX-T1563)

N

Nothing40

Hey guys,

I was just sitting here surfing the net,and my monitor started doing
wierd stuff.. Lastnight the image faded out a bit,got kinda
sideways,and *CRACK!* something inside arced.(I'm suspecting one of
the built in sparkgaps fired.) and then came right back.
I took it apart,looked for charred resistors,or bulging caps,and
everything looks okay.I also dusted it out fairly well.(thought maybe
the dust was causing a path for the arc to jump?) So,now this morning
it did it again,and now the picture is kind of unstable,getting
larger/smaller just a bit every few minutes,like a dirty H/V size
pot,except this monitor has the digital on-screen menu stuff.

The model # is TX-T1563

(whoa,it just did it again..)
I dunno how I feel about using this thing in this condition..Hopefully
there won't be some massive catastophic failure with fireworks as I
sit here late at night.. :-o

Any ideas,pointers,thoughts on what might be causing this? I'm
suspecting something in the flyback circuit (HOT,leaky cap etc.,maybe
the flyback itself?))Any clues you could give me would be great..
Thanks! Patrick.
 
Top