Maker Pro
Maker Pro

sram data sheet wanted tc5516apl-2

G

gcd

Hi all,
looking for a datasheet on a toshiba tc5516apl-2 2kx8 sram. It's not a 6116
device by the looks - i replaced one with a hm6116p-4 and no go. Supposedly
the same pinout (according to the schematics). the 5516 is 200ns according
to the parts list and the 6116p-4 i used is 200ns also.

The 6116 tests OK, the 5516 tests bad as a 6116. The only diff I think
exists is the /OE is called /CS2 on the 6116.

The 5516 may be bad, in the equipment it's in - it is tested as "block 1
failed", there are 12 of these in there. When i replaced the 5516 with the
6616 i got a different message saying memory block conflict, checked the
74ls138s used as decoders, they are OK.

So either there is a difference between a 5516 and a 6116 and/or there is
another faulty 5516 on the board as well, however the self test doesnt see
any other faults. But the marching ones test may not see it i suppose.

Can't find it on the tosh site either.

Or if you can list equivalents let me know

Thanks
Greg
 
G

gcd

Hi all,
an update.
moved the "bad" sram to another spot, the failed block message followed it,
so it is bad. again if i put a 6116 in its place i get a conflict problem.
So 5516 does not = 6116 it would appear

anyone got any TC5516APL-2s for sale?

Greg
 
G

gcd

Hi again,
tested a good 5516 and it also failed the 6116 test. so there must be some
nuance about timing or similar?

Thanks
Greg
 
Top