Maker Pro
Maker Pro

Sony KV35V36

V

Vince

Hi!
The usual thing went wrong with the power supply, instead of fixing it
myself I had it rebuilt by (pts). now the set comes on but with only about
25 k on the anode with about half raster, I put 140 volts to the set with
the isolation transformer and I get about 3/4 raster and the picture comes
in sync and I have about 20k on the anode, I can't figure out if its the p/s
or something on th main chassis causing the problem.
I need some help. Sony KV35V36
Thank you.
Vince
 
B

bz

Hi!
The usual thing went wrong with the power supply, instead of fixing
it
myself I had it rebuilt by (pts). now the set comes on but with only
about 25 k on the anode with about half raster, I put 140 volts to the
set with the isolation transformer and I get about 3/4 raster and the
picture comes in sync and I have about 20k on the anode, I can't figure
out if its the p/s or something on th main chassis causing the problem.
I need some help. Sony KV35V36

Is it possible that it is set for 220 VAC rather than 110 VAC input?






--
bz

please pardon my infinite ignorance, the set-of-things-I-do-not-know is an
infinite set.

[email protected] remove ch100-5 to avoid spam trap
 
Top