Maker Pro
Maker Pro

sim card interface in a phone

P

pes

Hi,

I was asked to change the sim card slot of a phone.
By removing the old connector broken, I have ripped the track of the
"D-(USB Inter-Chip)" pin. Do you know if the phones sometimes use this
interface to communicate with the SIM card and in what circumstances? In
this case, have you got an idea of ​​the type of circuit that is
connected to this pin?

thank you
 
T

TTman

pes said:
Hi,

I was asked to change the sim card slot of a phone.
By removing the old connector broken, I have ripped the track of the
"D-(USB Inter-Chip)" pin. Do you know if the phones sometimes use this
interface to communicate with the SIM card and in what circumstances? In
this case, have you got an idea of ??the type of circuit that is connected
to this pin?

thank you
I doubt - just for charging, unless there is a camera and then it's for
downloading.
 
P

pes

Le 14/09/2012 13:17, Michael A. Terrell a écrit :
It won't turn on a smart USB charger or port.

http://www.beyondlogic.org/usbnutshell/usb2.shtml


Thank you, but the pin broken isn' t on the USB/charger interface but on
the SIM connector.

I think this interface was designed to accelerate the transfer of files
with the sim card, but these cards haven' t finally integrated many
flash memory and so are not really used to store large files (pictures,
.... )
 
Top