Hi,
I'm working with a telit module that has a foot print for placing a
sim card holder directly on the back of it. I've been searching high
and low but I can't seem to find the holder that would fit it.
Here's a link to the module I'm using:
http://www.telit.com/en/products.php?p_id=3&p_ac=show&p=12
Unfortunately, the module displayed at the above link has a foot print
that's slightly different from what I actually have.
The foot print actually has 4 pads closer together (with about .33 mm
spacing between the pads) on one end than on the other end (which have
a ~1.2 mm gap between the pads). The footprint is about 30 mm x 18
mm. I apologize for not having a drawing but if anyone has any ideas
on where to get this sim card holder please let me know.
Thanks,
Rich
I'm working with a telit module that has a foot print for placing a
sim card holder directly on the back of it. I've been searching high
and low but I can't seem to find the holder that would fit it.
Here's a link to the module I'm using:
http://www.telit.com/en/products.php?p_id=3&p_ac=show&p=12
Unfortunately, the module displayed at the above link has a foot print
that's slightly different from what I actually have.
The foot print actually has 4 pads closer together (with about .33 mm
spacing between the pads) on one end than on the other end (which have
a ~1.2 mm gap between the pads). The footprint is about 30 mm x 18
mm. I apologize for not having a drawing but if anyone has any ideas
on where to get this sim card holder please let me know.
Thanks,
Rich
