Maker Pro
Maker Pro

samsung crt slim tv

vertical, 4inches lang ang picture nya, ngpalit n aq ng vertical-out,ganun pa din. pls mga master, help me..


translation

vertical picture, is only 4 inches high. has changed the vertical output but nothing changed

help me
 
Last edited by a moderator:
.


Actually . . . . .it's . . . . Help,Help me Rhonda . . .

"My widdle tee-wee only has 4 inches of picture, I've changed the vertical output, but its still being the same."

With an IP identifier located somewhere from the back alleyways of Baguio City.

Ismelda Marcos say:

Sr Geylord Tacahl,

Ibigay sa amin ang modelo o chassis number ng Samsung unit, muling ihinang koneksyon ALL .. .ALL . . .ALL . . . paligid ng vertical circuit.

Dahil ang banggitin ng mga ito sa pagkakaroon ng isang vertical output, hindi ba ito isang uri CRT ng televisioon sa halip ng isang flat panel TV?

73's de Edd
 
Sir Martaine . . . .

OK . . . .then . . . .more conservatively . . . .sometimes a little tap-a, tap-a,tap-a on the chassis PCB in that area, using a small plastic
screwdriver handle, can reveal an intermittent solder/to /component connection.
Ergo . . . therein not necessitating a more involved banging.

73's de Edd
 
One end of the vertical deflection coil will be connected to the IC, the other to an electrolytic capacitor. Check the capacitor.
 
Top