Hello everyone (first time post)
For all I know this might be a common circuit?
I need to supply 24v at about 1500w to a motor driver and I know very little about analog circuits. The idea is to use a PIC to monitor the voltage on the cap and control it with the FET. The PIC is isolated from the power circuit and supplies the power to the normally open relay if the PIC sees a voltage rise on C1 beyond normal it will shut down the relay.
Can this be considered safe as opposed to lithium batteries or mass transport etc?
I will never use this circuit as I do not want the liability so it’s just a thought experiment at the moment.
I’ve attached 2 drawings basic circuit and circuit with redundancies.
For all I know this might be a common circuit?
I need to supply 24v at about 1500w to a motor driver and I know very little about analog circuits. The idea is to use a PIC to monitor the voltage on the cap and control it with the FET. The PIC is isolated from the power circuit and supplies the power to the normally open relay if the PIC sees a voltage rise on C1 beyond normal it will shut down the relay.
Can this be considered safe as opposed to lithium batteries or mass transport etc?
I will never use this circuit as I do not want the liability so it’s just a thought experiment at the moment.
I’ve attached 2 drawings basic circuit and circuit with redundancies.