D
Dani
I replaced the vertical IC, but found the service switch in the wrong
position. It was at another shop. Now I have 12 volts. Jump the relay,
& I get a raster, no video, no front button control.
5 volts, 33 volts, & 12 volts to tuner. The jungle IC is putting out
no R G B but vertical, & horizontal are both fine. 10.5 volts to the
relay. The relay is ok. Ides? Dani.
M # CX32630, Ch # TAC9035,
position. It was at another shop. Now I have 12 volts. Jump the relay,
& I get a raster, no video, no front button control.
5 volts, 33 volts, & 12 volts to tuner. The jungle IC is putting out
no R G B but vertical, & horizontal are both fine. 10.5 volts to the
relay. The relay is ok. Ides? Dani.
M # CX32630, Ch # TAC9035,
