M
Mike
Ok I have a RCA PTK169PG Projection TV, and it has a bad flyback
Transformer T4401. I have the Microfishe for this chassy from RCA, it
shows it as a Family 4 chassy, now the parts list shows a family 1
chassy as using a Part# 226094
and Family 2 & 3 using a part# 200450.
But for Family 4 it doesn't list the T4401 at all!
The number off the Transformer is missing of corse. so I cant see it
the number is the same as one of the 2 transformers listed.
Does anyone know what the right PN for this chassy is??
BTW I did put the transformer out and rang it with a Sencore VA62,
also with a Sencore LC102 and LC75 just to be sure and the most I
could get out of it was 2 rings..
The power supply comes up to 145v in standby, and the 15v run comes up
to 13.5v but no turn-on..
Thanks Mike
Transformer T4401. I have the Microfishe for this chassy from RCA, it
shows it as a Family 4 chassy, now the parts list shows a family 1
chassy as using a Part# 226094
and Family 2 & 3 using a part# 200450.
But for Family 4 it doesn't list the T4401 at all!
The number off the Transformer is missing of corse. so I cant see it
the number is the same as one of the 2 transformers listed.
Does anyone know what the right PN for this chassy is??
BTW I did put the transformer out and rang it with a Sencore VA62,
also with a Sencore LC102 and LC75 just to be sure and the most I
could get out of it was 2 rings..
The power supply comes up to 145v in standby, and the 15v run comes up
to 13.5v but no turn-on..
Thanks Mike
