Maker Pro
Maker Pro

RCA chassis ATC010A

G

Gary Woodruff

Hello, I have an RCA chassis # ATC010A. The set will power up and
display a pic for about 5 seconds before turning off. I can hold any
front panel button (vol, channel, etc) and the set will stay powered on
until the button is released. I know these sets have problems with the
front panel assembly being defective and causing on/off by itself
problems. I tried powering on set and disconnecting the cable to the
front panel button assembly but the set still powers off after a 5
seconds of picture. I have also checked for cold solder joints and
replaced the HOT. Anyone have any suggestions or a print?

Thanks, Gary
 
C

catpandaddy

Gary said:
Hello, I have an RCA chassis # ATC010A. The set will power up and
display a pic for about 5 seconds before turning off. I can hold any
front panel button (vol, channel, etc) and the set will stay powered on
until the button is released. I know these sets have problems with the
front panel assembly being defective and causing on/off by itself
problems. I tried powering on set and disconnecting the cable to the
front panel button assembly but the set still powers off after a 5
seconds of picture. I have also checked for cold solder joints and
replaced the HOT. Anyone have any suggestions or a print?

Thanks, Gary

I ONCE HAD A DICK IN MY MOUTH AND I THOUGHT IT TASTED LIKE HEAVEN.
 
Top