Maker Pro
Maker Pro

RCA 32V434 Dead set

G

Gary L. Woodruff

howdy, I have a RCA model# 32v434 that has no picture and no sound. I
have checked the fuse. When first plugged in you can hear a relay click
and if you press the power button the power light flashes on and off
until you unplug it. Any and all help is greatly appreciated.

Thanks, Gary
 
K

Ken

Gary said:
howdy, I have a RCA model# 32v434 that has no picture and no sound. I
have checked the fuse. When first plugged in you can hear a relay click
and if you press the power button the power light flashes on and off
until you unplug it. Any and all help is greatly appreciated.

Thanks, Gary

I would suspect your set is going into an over current condition.
Check for a shorted component in the HV circuit for a start. If nothing
is found there, check for the same in the LV circuits. I trust you do
have the necessary instruments and knowledge?? If not, take it to
someone who does, it will be cheaper and safer in the long run.
 
G

Gary L. Woodruff

Meat said:
Do you have prior experience repairing anything 'electronic'?
Especially something that has lethal voltages inside?


Howdy all, Yes I am proficient with all test equipment. I am aware of
the proper procedure to discharge a flyback etc. I do not have a HV
probe. I have read the flyback and HOT are common failures in RCA's.
I do not have years of experience with TV's and have not repaired any in
15 years or more. I am looking for some general guidance or someone with
many years of TV repair that can SMELL whats wrong!


Thanks, Gary
 
Top