RCA 257805 flyback generic questions

[bob urz]

I ordered to try a replacement Flyback for rca 257805 flyback out of a
36" TV. I did not expect a after market flyback to be identical.
BUT, there is a lug under the focus pack assembly which is NOT on the
after market unit. There seems to be a wire there on the aftermarkt
flyback, but it does not poke down and i would have to solder a lug on
to it to use it. anyone use one of these aftermarket flybacks and know
if the lead is needed? The one i am trying to use is a HR8934 from MCM.
Th;is lead is under the focus pack and is NOT part of the circle of
wires that poke to the PC board

www.HRdiemen.es

Bob

 

[UFO]

Diemen usually connect the tab under the focus scrn pack internally to a
corresponding pin - see here pin No. 7

http://www.flyback.com/products/index.php?command=viewSchema&filename=./img/esquemas/HR8934.gif


the wire you ask about I can only guess is for the screen.

 

[hr(bob) [email protected]]

I ordered to try a replacement Flyback for rca 257805 flyback out of a
36" TV. I did not expect a after market flyback to be identical.
BUT, there is a lug under the focus pack assembly which is NOT on the
after market unit. There seems to be a wire there on the aftermarkt
flyback, but it does not poke down and i would have to solder a lug on
to it to use it. anyone use one of these aftermarket flybacks and know
if the lead is needed? The one i am trying to use is a HR8934 from MCM.
Th;is lead is under the focus pack and is NOT part of the circle of
wires that poke to the PC board

www.HRdiemen.es

Bob

Could it just be a ground lead that is supposed to touch the chassis
when the transformer is mounted to the chassis??