Questions about Ensoniq Audio Pci sound card.

[Gaetan Mailloux]

Hi

I have just buy a used Ensoniq Audiopci 1370, it's print on the components
side; partno: 4001036901 rev f, Audio Pci 1000 , Ensoniq 1997.

And on the other side, on a white sticker ; E233014 AudioPci 9716
6000566 assyno: 01 REV: E , assemble in USA.

Is it the old and genuine Ensoniq card made by Ensoniq (not
Soundblaster) ?

There's 3 female jack on the side of the board, one green plug have an
arrow ---> , the other a black plug an arrow <---, which one are for line
in and for line out ?

And where do I plug the cdrom cable, on j6-cd audio in, j7-tv
tuner-ide-sony cd in, or j8-tad i/o ?

Any web site where I can find the instructions for my card ?


Thank you very much.

Bye

Gaetan

 

[Ralph Wade Phillips]

Howdy!

Hi

I have just buy a used Ensoniq Audiopci 1370, it's print on the components
side; partno: 4001036901 rev f, Audio Pci 1000 , Ensoniq 1997.

And on the other side, on a white sticker ; E233014 AudioPci 9716
6000566 assyno: 01 REV: E , assemble in USA.

Is it the old and genuine Ensoniq card made by Ensoniq (not
Soundblaster) ?

That's Creative Labs, and yes, YOUR card is before the BORG.

There's 3 female jack on the side of the board, one green plug have an
arrow ---> , the other a black plug an arrow <---, which one are for line
in and for line out ?

Lime Green = Line Out, Black = Line In.

The Lime Green = Line Out is a standard, BTW.

And where do I plug the cdrom cable, on j6-cd audio in, j7-tv
tuner-ide-sony cd in, or j8-tad i/o ?

"And where do I plug the cdrom cable, on j6-cd audio in ..." Seems
like you answered your own question.

Unless it fits "j7-TV Tuner-IDE-Sony CD" in. Then use that.

J8 - "Telephone Answering Device I/O" won't work.

RwP

 

[dennis]

Hi

I have just buy a used Ensoniq Audiopci 1370, it's print on the components
side; partno: 4001036901 rev f, Audio Pci 1000 , Ensoniq 1997.

And on the other side, on a white sticker ; E233014 AudioPci 9716
6000566 assyno: 01 REV: E , assemble in USA.

Is it the old and genuine Ensoniq card made by Ensoniq (not
Soundblaster) ?

There's 3 female jack on the side of the board, one green plug have an
arrow ---> , the other a black plug an arrow <---, which one are for line
in and for line out ?

And where do I plug the cdrom cable, on j6-cd audio in, j7-tv
tuner-ide-sony cd in, or j8-tad i/o ?

Any web site where I can find the instructions for my card ?


Thank you very much.

Bye

Gaetan

The arrow pointing out is line out (green). The one with the arrow
pointing in is line in (black). I have my CD input on the tuner-ide-sony
cd. That is the one that works with the mixer software I have. I think
it depends on the software. Gateway used the OEM version of the one I
have so I was able to find some information in the support section of
their website.