Maker Pro
Maker Pro

Q: need help with Eprommer Advantest SE 4948

P

Peter Hendricks

Hi,

I recently bought an old Eprom gang programmer Advantest SE 4948. The
programmer initializes correctly with no error message, adjusts itself
to the Eprom-type according to the switch at the back plane, but does
not react on any keys pressed. Consequently, I cannot start the copy
process.

Does anyone have any hint for me what might be wrong? I have
disassembled the case and found a firmware eprom inside that seems to
be rewritten. Maybe this has gone wrong and I need a new copy of the
firmware.

Does anyone here on the line have such a programmer and could provide
me with a binary file of an appropriate firmware?

Thanks in advance for any help!

Best Regards,
Peter
 
Top