Maker Pro
Maker Pro

powering more than one PDA with a single A/C adapter?

Would it work to plug two or more PDAs into one AC adapter using a Y-
cable?

Purpose = I'm working on an Atari LYNX type game for 2-6 PDAs, either
Cassiopeia E-100/105/115/125 (5.5v or 5.9v for the E-125).

For it to work, would they have to be wired in parallel or serial?
Using the original charger/adapter that came with the PDA or one with
higher current?
How many could you hook up and still have them run reliably?

My fallback plan is battery power but if it is possible to plug in for
power I would prefer that.

Any info appreciated...
 
Top