Maker Pro
Maker Pro

Philips Digital Rerrestrial Receiver DTR500/05

N

newbee

Hi all,

The Digital Receiver would not switch on. I opened it up, and there is
I presume to be Fuse labeled F1 with the following marking on it :
CQ MET T2A 250V.

Am I correct in assuming it is a fuse, and if it is, where can I get
it in UK.

Thanks for your help.
 
A

Arfa Daily

newbee said:
Hi all,

The Digital Receiver would not switch on. I opened it up, and there is
I presume to be Fuse labeled F1 with the following marking on it :
CQ MET T2A 250V.

Am I correct in assuming it is a fuse, and if it is, where can I get
it in UK.

Thanks for your help.

It is a 2 amp fuse with a "T" - that is time delay - rating. FWIW, if it is
the mains power fuse in a switchmode power supply, it is highly unlikely
that it will be the only problem. You can get one from any Maplin's store.
It is a very common value. Its size will be 20mm.

Arfa
 
Top