Maker Pro
Maker Pro

phase voltage

If the following equation gives the phase voltage for a PMAC when the phase current (Iph) is in phase with the back emf (Eph)

Vph = (Eph + Rs*Iph) + j*2*pi*frequency in hertz*Ls*Iph

how would equation change when the Iph is 180 degrees out of phase with the back emf?
 
D

Don Kelly

If the following equation gives the phase voltage for a PMAC when the phase current (Iph) is in phase with the back emf (Eph)

Vph = (Eph + Rs*Iph) + j*2*pi*frequency in hertz*Ls*Iph

how would equation change when the Iph is 180 degrees out of phase with the back emf?
replace Iph by -Iph or + by -
 
Top