Maker Pro
Maker Pro

Panasonic TX32DK1

K

Keith

Hi everyone,

I have recently had brightness problems with my TX32DK1, whic
culminated in one of the capacitors blowing on the small CRT circui
board (the one that plugs directly onto the CRT). I would like t
replace the capacitor, but unfortunately, the marking on the caniste
has been destroyed in the heat. The Capacitor number on the circui
board is C361.

Does anyone have any idea what value it is, both its capacitance an
voltage rating. Better still, does anyone have a diagram of tha
circuit board.

Many thanks

Keit
 
K

Keith

Art said:
I'd wager probably a 10 ufd @ 160 VDC, or very similar.
"Keith" [email protected] wrote in message

Hi everyone,

I have recently had brightness problems with my TX32DK1, which
culminated in one of the capacitors blowing on the small CRT circuit
board (the one that plugs directly onto the CRT). I would like to
replace the capacitor, but unfortunately, the marking on the canister
has been destroyed in the heat. The Capacitor number on the circuit
board is C361.

Does anyone have any idea what value it is, both its capacitance and
voltage rating. Better still, does anyone have a diagram of that
circuit board.

Many thanks

Keith

Thanks Art, Seems good to me.

Does anyone else have information
 
Top