Maker Pro
Maker Pro

Panasonic Plasma fault

D

David L. Jones

Ho ho ho, my Plasma has died.
A Panasonic TH-42PV60A

The fault looks like this:
http://www.alternatezone.com/images/PanasonicFault25.jpg

A back bar down the right side with a white stripe. Rest of the image is
perfect.

It'll go to a local TV service dude in due course, would just like some
expert opinions on the likely prognosis?

Rarely gets any use, just a few hours a week at most. Not quite 3 years old.

Not under warranty of course.

Thanks
Dave.
 
P

Phil Allison

"David L. Jones"
Ho ho ho, my Plasma has died.

** No it hasn't.
A Panasonic TH-42PV60A

The fault looks like this:
http://www.alternatezone.com/images/PanasonicFault25.jpg

A back bar down the right side with a white stripe. Rest of the image is
perfect.


** Errr - a strip of back "gaffa" tape will fix that one !!

Dude !!!!!!!!!!!


BTW

Santa brought me a Rigol DS1052E for Xmas.

One very neat piece of kit.

The FFT function and the counter with period mode for
continuous 6 digit resolution are killers.

The Chinese character instruction booklet is priceless !


..... Phil
 
D

David L. Jones

Phil said:
"David L. Jones"


** No it hasn't.

Well, ok, it's sick, it has to go to the toy hospital.
** Errr - a strip of back "gaffa" tape will fix that one !!

Well, yeah, kinda. But it would suck if say the twin suns on Tatooine became
just the one sun instead.
BTW

Santa brought me a Rigol DS1052E for Xmas.

I like Santa!
Does Santa use eBay?
Can't believe the price is now almost half of what I paid for mine.
One very neat piece of kit.

Yeah, for the price it's pretty darn neat.
The FFT function and the counter with period mode for
continuous 6 digit resolution are killers.

The Chinese character instruction booklet is priceless !

I prefer good Chinglish myself.

Dave.
 
G

gcd

Hi,
perhaps these may help, even though a different brand.


Cheers
Greg
 
K

keithr

David said:
Ho ho ho, my Plasma has died.
A Panasonic TH-42PV60A

The fault looks like this:
http://www.alternatezone.com/images/PanasonicFault25.jpg

A back bar down the right side with a white stripe. Rest of the image is
perfect.

It'll go to a local TV service dude in due course, would just like some
expert opinions on the likely prognosis?

Rarely gets any use, just a few hours a week at most. Not quite 3 years old.

Not under warranty of course.

Thanks
Dave.
My LG 42PY10X had a similar problem, a red line down the left side, I
don't know whether Panasonic use the LG chassis, I believe that several
manufacturers do. Mine was caused by the control board which is
notorious for having bad joints on some resistors. My original idea was
to resolder the joints until I found out that there were 144 surface
mount resistors involved, and without a microscope or a workshop manual
to localise the problem I didn't want to spend the time redoing 288
surface mount joints, so I bought an upgraded board for $190.

It took about1.5 hours to change the board, no soldering, just a lot of
screws and connectors.
 
T

Trevor Wilson

David L. Jones said:
Ho ho ho, my Plasma has died.
A Panasonic TH-42PV60A

The fault looks like this:
http://www.alternatezone.com/images/PanasonicFault25.jpg

A back bar down the right side with a white stripe. Rest of the image is
perfect.

It'll go to a local TV service dude in due course, would just like some
expert opinions on the likely prognosis?

Rarely gets any use, just a few hours a week at most. Not quite 3 years
old.

Not under warranty of course.

**Did you receive my email?
 
Top