T
TEX
Panasonic 29" TV, Model TX-29GF10X
Has a red tinge over the complete picture.
No green is showing. Just red and blue.
Measured the KB,KG and KR (assuming these are the cathode voltages) on
the CRT board with it connected and disconnected
KB =120VDC
KG =195VDC
KR =195VDC
Also removed the board from the CRT and did the same test and same
voltages apply. Going to swap some of the output transistors but am
pretty sure they ok.
Where to look next???
Thanks
TEX
Has a red tinge over the complete picture.
No green is showing. Just red and blue.
Measured the KB,KG and KR (assuming these are the cathode voltages) on
the CRT board with it connected and disconnected
KB =120VDC
KG =195VDC
KR =195VDC
Also removed the board from the CRT and did the same test and same
voltages apply. Going to swap some of the output transistors but am
pretty sure they ok.
Where to look next???
Thanks
TEX