Maker Pro
Maker Pro

Ordering from Polykom?

J

James

Just wondering if anyone here gets components from them? If so do they have
minimum quantity or cost per order?

I want to get a few components in small quantities, noticed in the listings
some of the components have a "pack size" of 500 or so yet a practically
identical item might have a pack size of 1, and is this the minimum order
quantity? I dont really want to order one of something that costs $10 and
find out that 1 meant a pack of 500 and my credit card has been charged
$5000. Their prices are so low for so many things there must be a catch
somewhere along the line, but cant find any info on the website to state
minimums etc.

Regards
James
 
A

Andy

James said:
Just wondering if anyone here gets components from them? If so do they have
minimum quantity or cost per order?

I want to get a few components in small quantities, noticed in the listings
some of the components have a "pack size" of 500 or so yet a practically
identical item might have a pack size of 1, and is this the minimum order
quantity? I dont really want to order one of something that costs $10 and
find out that 1 meant a pack of 500 and my credit card has been charged
$5000. Their prices are so low for so many things there must be a catch
somewhere along the line, but cant find any info on the website to state
minimums etc.

Regards
James

G'day James,

Check out this link - all the info you need is here:

https://www.polykom.com/showpage.cfm?pageid=7


Cheers,
Andy
 
J

James

Andy said:
"James" <[email protected]> wrote in message

G'day James,

Check out this link - all the info you need is here:

https://www.polykom.com/showpage.cfm?pageid=7


Cheers,
Andy

OK...that explains that...thankyou. Kind of amazing how they can stock
levels below the pack quantity for some items then. Just wish it was more
clear as to what products can and cant be split from a full pack. The scary
thing is that any product can be added to the shopping cart in low
quantities and the final checkout cost is equal to those added rather than
the actual cost that could be a LOT higher for minimum quantity lines.

Wow...that was a long winded sentence wasn't it

Thanks again
James
 
A

Andy

Ray said:
403.4 Forbidden :(


Dunno why it didn't work for you..... but I'll hold your hand and walk you thru it:

1. Go to www.polykom.com

2. Click the "help" button on the right hand side

3. All will be revealed

Andy
 
R

Rudolf Ladyzhenskii

Hi,

I was getting some stuff from them.
They have minimal order quantity of $50. Some parts may have MOQ as well due
to the packaging. For examle, you have to buy SMT resistors in a reel of
5000pc.

Just call them and discuss your needs -- I found them to be pretty helpful.

Rudolf
 
Top