L
lerameur
Hello,
I have been thought Orcad 10.5 (pspice) to buil my simulation. but so
often I get this error message:
ERROR -- Subcircuit LM393 used by X_U1A is undefined
Can someone tell me how to fix this this.
I use the schematic from here:http://www.swansontec.com/sprobe.htm
Alos I use the LM393 taken from the Orcad Library of the software.
I do not get this with all the components but quite a few (in other
circuits). The way I usually get around it,is to use student pspice and
use similar op-amp. BUt I really want to know how tofix this problem so
I will only use Orcad 10.5
thank you
ken
I have been thought Orcad 10.5 (pspice) to buil my simulation. but so
often I get this error message:
ERROR -- Subcircuit LM393 used by X_U1A is undefined
Can someone tell me how to fix this this.
I use the schematic from here:http://www.swansontec.com/sprobe.htm
Alos I use the LM393 taken from the Orcad Library of the software.
I do not get this with all the components but quite a few (in other
circuits). The way I usually get around it,is to use student pspice and
use similar op-amp. BUt I really want to know how tofix this problem so
I will only use Orcad 10.5
thank you
ken
