D
Dani
F36650YX01 ATC113CA1, dead, replace 2SC5148 horizontal output, &
flyback with 257805 (generic), unit runs fine for 5 minutes, then blows
output again. Can't find anything else wrong. Same story with
F32650YX01 ATC113CA1, but two 257805 generic flybacks measure
statically different, like their the wrong flyback, & the horizontal
output measures shorted in circuit, unless you remove the flyback. I
didn't use this flyback, as I was sure it will blow the set. Put in
another 257805...looks different (has a different G 2, & focus pot),
set works fine, five minutes later it blows the output. F32649YX51 CTC
203CA9 2SC5148
hoizontal output shorted, 244247 flyback bad, put two brand new generic
ones with bad
G 2 pots, set will shut down, & right back on eratically, put in an
original, now unit is perfect. I'm seeing two. or three out of five, or
six generic flybacks bad. I'm only one small shop, in one small town.
How much are you guys seeing? What are you guys doing to get these sets
working right? Getting a lot of bad, & questionable parts, especially
flybacks, can't trust generic, but customers will not pay a fair price
for original. Thanks for any input, Dani.
flyback with 257805 (generic), unit runs fine for 5 minutes, then blows
output again. Can't find anything else wrong. Same story with
F32650YX01 ATC113CA1, but two 257805 generic flybacks measure
statically different, like their the wrong flyback, & the horizontal
output measures shorted in circuit, unless you remove the flyback. I
didn't use this flyback, as I was sure it will blow the set. Put in
another 257805...looks different (has a different G 2, & focus pot),
set works fine, five minutes later it blows the output. F32649YX51 CTC
203CA9 2SC5148
hoizontal output shorted, 244247 flyback bad, put two brand new generic
ones with bad
G 2 pots, set will shut down, & right back on eratically, put in an
original, now unit is perfect. I'm seeing two. or three out of five, or
six generic flybacks bad. I'm only one small shop, in one small town.
How much are you guys seeing? What are you guys doing to get these sets
working right? Getting a lot of bad, & questionable parts, especially
flybacks, can't trust generic, but customers will not pay a fair price
for original. Thanks for any input, Dani.