need Sony WEGA ID map table for kv 32fv300

[Bob Sprentall]

I am servicing a kv-32fv300. the osd looks fine, but when signal is
applied, the display flashes. i noticed that removing chrominance
fixes this problem. changing id0 in service mode made one of the
video inputs work, but the rest still have problems. the manual I have
doesn't refer to the ID values for the model. it only has the xxfs100
and xxfs200 lines. i tried resetting to defaults, but this didn't
help. could someone tell me what the values for id0-id7 should be on
this tv?

 

[Art]

ID0 - 78 NOMINAL 89 SET VALUE US
ID1 - 79 NOMINAL 63 SET VALUE US
ID2 - 7A NOMINAL 237 SET VALUE US
ID3 - 7B NOMINAL 98 SET VALUE US
ID4 - 7C NOMINAL 78 SET VALUE US
ID5 - 7D NOMINAL 128 SET VALUE US
ID6 - 7E NOMINAL 6 SET VALUE US
ID7 - 7F NOMINAL 24 SET VALUE US

Now that you have these values programme them into the eprom and save them.
Hopefully it resolves your situation. IMHO get the right manuel before
delving too deep into these complex items.

 

[Bob Sprentall]

thanks much!