B
Bob Hausler
I have had this system for a long time and it is still working fine.
Recently, I decided to try to link it to my X10 HVAC control by monitoring
the alarm system being armed with an X10 PowerFlash if during the day I
would initiate a temperature setback.
Unfortunately, I haven¹t been successful getting the Napco system to trigger
the X10 PowerFlash module. According to the 1016 manual, a lug (E4) will go
low when the system is armed but it actually seems to be low all the time.
I don¹t know if it¹s defective or if I¹m doing something wrong.
If anyone can give me some info or advice, I would appreciate it.
Thanks.
Recently, I decided to try to link it to my X10 HVAC control by monitoring
the alarm system being armed with an X10 PowerFlash if during the day I
would initiate a temperature setback.
Unfortunately, I haven¹t been successful getting the Napco system to trigger
the X10 PowerFlash module. According to the 1016 manual, a lug (E4) will go
low when the system is armed but it actually seems to be low all the time.
I don¹t know if it¹s defective or if I¹m doing something wrong.
If anyone can give me some info or advice, I would appreciate it.
Thanks.
