Maker Pro
Maker Pro

need help on lcd

I have a home made computer which I download all the data from a web site the only problem is the connection to a lcd is the problem and I can not fine any lcd for the home made computer. Here is one part of the schematic picture to connect the lcd and the other picture is the lcd connect to the home made computer as this from the download from the web site.Can any one help. I have post this problem before some time back and I am hoping some can help
 

Attachments

  • 20210816_084949.jpg
    20210816_084949.jpg
    354.1 KB · Views: 4
  • system.jpg
    system.jpg
    140.6 KB · Views: 4

Harald Kapp

Moderator
Moderator
The computer generates a BAS signal, BAS being the German equivalent for "composite video". You will need an LCD with a composite video input or a converter from composite to e.g. VGA if your LCD has a VGA input..
 
Top