K
kw
I have a Philips Model 7P6051 chassis PTV780.
It has no HV. I pulled the HV line from the HV xformer to the HV Splitter.
The HV came up. Bad Splitter? The CRT filaments look ok and I separated
each CRT and HV did not come on.
I located an HV Splitter for my set and I am ready to Install it. Is there
any thing I should watch for? Will I need to adjust anything afterwards?
Thanks
Keith
It has no HV. I pulled the HV line from the HV xformer to the HV Splitter.
The HV came up. Bad Splitter? The CRT filaments look ok and I separated
each CRT and HV did not come on.
I located an HV Splitter for my set and I am ready to Install it. Is there
any thing I should watch for? Will I need to adjust anything afterwards?
Thanks
Keith
