Maker Pro
Maker Pro

Need help changing a mini heater circuit.

  • Thread starter Ricky Spartacus
  • Start date
R

Ricky Spartacus

It's getting cold out here and I need a heater for chopping logs. I
like to make my 1000W Holmes mini heater run medium. Right now it's
built to be stuck on HI and my feet gets burned. So I thought maybe I
can hook several car alternator diodes facing the heater coils and
make it run cooler. Here, take a look at my sketch and please let me
know if this is possible.

http://snurl.com/3a3c

Thanks
Ric
 
B

Baphomet

Ricky Spartacus said:
It's getting cold out here and I need a heater for chopping logs. I
like to make my 1000W Holmes mini heater run medium. Right now it's
built to be stuck on HI and my feet gets burned. So I thought maybe I
can hook several car alternator diodes facing the heater coils and
make it run cooler. Here, take a look at my sketch and please let me
know if this is possible.

http://snurl.com/3a3c

Thanks
Ric

I don't know what a car diode is rated at in terms of piv but I would
definately use a diode with a piv of 400+ volts and an If of 20 A. This
would provide roughly 50% derating and should work just fine.
 
by adding diodes I assume in series you adding waste as basically heaters. WALLMART sell them heaters for $20.0 the diodes will cost more. Get real
 
Top