M
mirza1867@gmail.com
I have to make a circuit that simulates how a vcr works.
Right now play, stop and forward work.
But, I dont know how to do the following
If play is on and then forward is pressed, both lights work.
If forward is on and then play is pressed, play lights up and forward
turns off.
If the above two work, they should also be able to be shut using the
stop button.
Btw, the forward light blinks which is why the clock is connected to
the and gate.
Any help will be appreciated as Ive been trying to get it to work for
the past few hours
thx
this is what I have so far
http://img193.imageshack.us/img193/1616/funtitled1cp.jpg
Right now play, stop and forward work.
But, I dont know how to do the following
If play is on and then forward is pressed, both lights work.
If forward is on and then play is pressed, play lights up and forward
turns off.
If the above two work, they should also be able to be shut using the
stop button.
Btw, the forward light blinks which is why the clock is connected to
the and gate.
Any help will be appreciated as Ive been trying to get it to work for
the past few hours
thx
this is what I have so far
http://img193.imageshack.us/img193/1616/funtitled1cp.jpg