need a BASIC flip flop, can't find one!

[Skidood]

Hi..just need an set/reset flip flop...not a JK type..not a D-type..are these still available?
Working supply voltage = 9 V

Thanks

 

[Skidood]

Let me add why I dont want a JK...I dont want to incorporate a clock in this very simple circuit I am building.
Plus there will not be that prohibited condition where both inputs are high.
I did find this IC...can anyone tell me, can I just control the outputs using the set and reset inputs while ignoring and not connecting the JK inputs?
http://www.ti.com/lit/ds/symlink/cd4027b.pdf

And here is the circuit I want to build
http://www.engineers-excel.com/Apps/Alarm/Description.htm

 

[cjdelphi]

So to toggle...

connect d to q (bar _ )

then use the clock pin to toggle on off (d flip flop)

 

[pebe]

You can use two 555 timers, wired as bi-stables, to accomplish what you want to do.

 

[Harald Kapp]

Build one from 2 NAND gates.
An integrated CMOS solution is the 4043B. Just enable the outputs permanently.
For 5V logic a 74118 can be used, but not for 9V.

 

[Alec_t]

You could just use the Set and Reset inputs of a CD4013, with the Clock and Data inputs grounded.