I am repairing a la-1831jmw-bk rev a2. Everything hardware wise tests out
fine. It briefly comes on, you can see what the computer is trying to
display for
about 5 or 10 seconds, then it says it cannot detect what is being displayed
(NO SIGNAL) and it clicks off. You can turn in on again, and it does the
same thing.
Any Ideas?
Thanks!
Aaron
[email protected]
fine. It briefly comes on, you can see what the computer is trying to
display for
about 5 or 10 seconds, then it says it cannot detect what is being displayed
(NO SIGNAL) and it clicks off. You can turn in on again, and it does the
same thing.
Any Ideas?
Thanks!
Aaron
[email protected]