Multiple Inputs/Outputs transmitter

[Anon_LG]

I am about to receive my first RF receiver and transmitter broadcasting in the 433-434 Mhz band. I am going to be using a multiplexer to transmit several bits of information. If there is anything that I should know please could I be told, this is my first try with RF transmitters and receivers.

 

[BobK]

Not sure what you mean by that. These transmitters are usually set up to transmit serial binary data, not analog, if that is what you mean.

Bob

 

[KrisBlueNZ]

Can you provide manufacturer and part numbers for the transmitter and receiver? Link to data sheets?

Do you want to do this without microcontrollers?

 

[Anon_LG]

I require a IC which has several inputs, the IC then interprets these inputs and sends the interpreted form to a transmitter, the transmitter outputs this one output into another IC which the undoes the interpretation, giving the original inputs as outputs. These inputs/outputs would only be digital. I would prefer not to use microcontrollers. This is where the specs are for the transmitter and receiver.

http://www.seeedstudio.com/depot/433Mhz-RF-link-kit-p-127.html

I think what I actually need is an encoder and decoder?

 

[BobK]

You can buy these transmitters and receivers with the encoder.

http://www.ebay.com/itm/433Mhz-RF-L...609?pt=LH_DefaultDomain_0&hash=item4150a85de9

Bob