N
no spam
First of all thanks for all the help everyone has offered so far.
After way too much time I FINALLY managed to get the blower out of the unit
AND the motor into a position I can read the tag. The info I got off is
that it is an A.O. Smith md# F48G44A48, listed as 3.1 amps, 4 speed. It
also has a connection diagram that looks sort'a like this:
Brown----------------
|
|
0 SEP CAP
|
|
Orange-----------------------
|
|
| line
HI |
MH |
ML --------|
Lo |
There's more info on the tag but to get at it is going to require a lot more
break down of the unit. I can do it if needed but I would much rather know
if the blower works before I spend any more time on it.
Again thanks for the help.
After way too much time I FINALLY managed to get the blower out of the unit
AND the motor into a position I can read the tag. The info I got off is
that it is an A.O. Smith md# F48G44A48, listed as 3.1 amps, 4 speed. It
also has a connection diagram that looks sort'a like this:
Brown----------------
|
|
0 SEP CAP
|
|
Orange-----------------------
|
|
| line
HI |
MH |
ML --------|
Lo |
There's more info on the tag but to get at it is going to require a lot more
break down of the unit. I can do it if needed but I would much rather know
if the blower works before I spend any more time on it.
Again thanks for the help.