M
Matt-NJ
I need a monochrome monitor for an old computer system. (DB-9
connector.)
Originally a Heathkit which failed; repair might be too time
consuming.
Now have a PARCO 12" model 1231 AT, which seems to work, but will not
display anything but a raster.
Problem may be in the monitor (which was supposed to be OK) or in the
interface. (I just plugged the DB-9 monitor plug into the DB-9 of the
computer.)
Any ideas? Anyone have the connector standards for these old systems
- which may not be so standard after all.
Any help/ideas appreciated. TIA -
Matt - [email protected]
connector.)
Originally a Heathkit which failed; repair might be too time
consuming.
Now have a PARCO 12" model 1231 AT, which seems to work, but will not
display anything but a raster.
Problem may be in the monitor (which was supposed to be OK) or in the
interface. (I just plugged the DB-9 monitor plug into the DB-9 of the
computer.)
Any ideas? Anyone have the connector standards for these old systems
- which may not be so standard after all.
Any help/ideas appreciated. TIA -
Matt - [email protected]