Maker Pro
Maker Pro

monitor ghosting 753s

Hello there!, i am doing a review of existing computer equipment and
noticed we have two monitors Samsung 753s syncmasters that are
exhibiting ghosting badly. I thought it might have been the unshielded
speakers next to the guns, but no change when I removed them. I tried
a deguass several times but no improvement. They seem to be perfectly
good monitors apart from this problem, which when typing black on
white (like in Word ) it looks bad and causes eye strain using it. I
checked the group messages already and noted , the comment on
unterminated cable, and lost pin 10 ground (which I see would cause
probs) but both are proper cables that are 'built in' to the monitor,
and direct to PCI video VGA adapters.
Any ideas?
thanks
Jeremusic
 
J

Jerry G.

On May 9, 9:36 am, [email protected] wrote:

This can be from capacitors in the video path of the colour video
amplifiers. A more common cause in these monitors is that the picture
tube is going weak.


Jerry G.
======
 
Top