Maker Pro
Maker Pro

Magnavox VCR/DVD MWD2205 Changing Output to Channel 4

Hi,

I have a relative who moved recently and asked me to hook up her Magnavox
VCR/DVD model MWD2205. Note: The owner's manual is lost or mis-placed.

After I hooked it up, and set the date/time, etc., the only thing I was
unable to do is change the output from channel 3 (default) to channel 4.

Older VCRs have a switch on the back, but some new equipment do not.
I explored the menu settings, but I didn't locate a place where I can change
the output (channel 3 or 4).

Does anyone have information on changing the output from channel 3 to
channel 4?

Thank You in Advance, John

PS, Remove "ine" from my email address
 
K

kaboom

Hi,

I have a relative who moved recently and asked me to hook up her Magnavox
VCR/DVD model MWD2205. Note: The owner's manual is lost or mis-placed.

After I hooked it up, and set the date/time, etc., the only thing I was
unable to do is change the output from channel 3 (default) to channel 4.

Older VCRs have a switch on the back, but some new equipment do not.
I explored the menu settings, but I didn't locate a place where I can change
the output (channel 3 or 4).

Does anyone have information on changing the output from channel 3 to
channel 4?

**My VCR is the same way, no switch on the back. Whenever I lose the
settings, for whatever reason, I use the VCR's remote to change it to
channel 3. I push 0 then 3 or something like that :) The VCR always
stays on channel three and I use the digital box to change the
channels when I want to record.
 
Top