Maker Pro
Maker Pro

Looking for a low profile PCI DVR capture card...

J

Jeßus

Four channels or greater. Does such a beastie exist? Not having much
luck on fleabay so far, TIA for any help where to find them...
 
B

Bob Milutinovic

Jeßus said:
Four channels or greater. Does such a beastie exist? Not having much
luck on fleabay so far, TIA for any help where to find them...

This is the "lowest" card I've managed to find;
http://www.aliexpress.com/item/s/697961716.html

It's not specified as a low profile card, but at first glance it appears to
be within the height limits of a low profile card - and if it manages to
physically fit in the required space, it'll simply be a matter of modifying
the backplate to suit.
 
J

Jeßus

This is the "lowest" card I've managed to find;
http://www.aliexpress.com/item/s/697961716.html

It's not specified as a low profile card, but at first glance it appears to
be within the height limits of a low profile card - and if it manages to
physically fit in the required space, it'll simply be a matter of modifying
the backplate to suit.

Thanks very much for that Bob, I'll check it out.
I've modified a few backplates before so as long as the card isn't too
high as you say, should do the job.
 
Top