Lister Diesel Generator - anyone interested?

[Bob F]

I have, here in Seattle, a 3 cylinder Lister diesel engine coupled to a 10 KW
Lima MAC sychronous generator. I bought this used a couple years ago as a
project, but haven't had the inclination to really work on getting it going. Is
there anyone out there that would have an interest in purchasing this for their
own project use?

These diesels are old classics, and the generator is huge, with windings for 120
and 240 VAC plus multiple 3 phase voltages.

I have pdf's for the SN349 generator and the lister SR3 manual/parts list I
could email to interested people.

Bob

 

[Vaughn]

Is
there anyone out there that would have an interest in purchasing this for their
own project use?

There are LOTS of those sort of folks! I might be one of them if there
wasn't a whole continent between us. You will find eager customers who
will love your machine at http://www.smokstak.com/ Post a classified ad
there.

Vaughn

 

[Dave911]

I agree with Vaughn... 100%
MAss is a 'fer piece away...
but I know it should fly wherever you enter it.. including that e bay
place..
good luck

 

[Jim Wilkins]

I agree with Vaughn... 100%
MAss is a 'fer piece away...
but I know it should fly wherever you enter it.. including that e
bay place..
good luck

The EPA doesn't allow them:
http://www.microcogen.info/index.php?topic=1452.0

 

[Vaughn]

The EPA doesn't allow them:
http://www.microcogen.info/index.php?topic=1452.0

Nonsense! There may (or perhaps not) be a ban on new units being
imported into the USA unless certified, but nothing that affects
existing units.

 

[Bruce Gordon]

I have, here in Seattle, a 3 cylinder Lister diesel engine coupled to a 10 KW
Lima MAC sychronous generator. I bought this used a couple years ago as a
project, but haven't had the inclination to really work on getting it going.
Is
there anyone out there that would have an interest in purchasing this for
their
own project use?

These diesels are old classics, and the generator is huge, with windings for
120
and 240 VAC plus multiple 3 phase voltages.

I have pdf's for the SN349 generator and the lister SR3 manual/parts list I
could email to interested people.

Bob

Send "Me" some pictures and give me a Price..... Bob....

Bruce in alaska fastpath at btpost dot net

 

[Bob F]

I sent you a reply, To: "Bruce Gordon" <[email protected]>
It was rejected. Is this a good address?

"Delivery to the following recipient failed permanently:

[email protected]

Technical details of permanent failure:
Google tried to deliver your message, but it was rejected by the server for the
recipient domain btpost.net by 207.229.103.70. [207.229.103.70].

The error that the other server returned was:
550 5.1.1 <[email protected]>: Recipient address rejected: User unknown in virtual
alias table

"

 

[Bruce Gordon]

I sent you a reply, To: "Bruce Gordon" <[email protected]>
It was rejected. Is this a good address?

"Delivery to the following recipient failed permanently:

[email protected]

Technical details of permanent failure:
Google tried to deliver your message, but it was rejected by the server for
the
recipient domain btpost.net by 207.229.103.70. [207.229.103.70].

The error that the other server returned was:
550 5.1.1 <[email protected]>: Recipient address rejected: User unknown in
virtual
alias table

"

Send "Me" some pictures and give me a Price..... Bob....

Bruce in alaska fastpath at btpost dot net

You left out the last part of the eMail address it is <fastpath at
btpost dot net> Put in the "path" and it will work...