Hello! I was wondering if I could get some help on building a schematic design with the following constraints:
An input for the circuit needs to be a tact-button with a debounce capacitor going into a KPP OR GPIO pin assigned as an external interrupt port. The driving port should be out of GPIO connected to the circuit with photo-MOS.
Thank you for any help in advance!
An input for the circuit needs to be a tact-button with a debounce capacitor going into a KPP OR GPIO pin assigned as an external interrupt port. The driving port should be out of GPIO connected to the circuit with photo-MOS.
Thank you for any help in advance!
