Inertial Measurment Unit (IMU) Selection !

[Peter010]

Hellow,

My case is about that I am going to launch a project which requires the use of a combined Accelerometer + Gyroscope. I have mad my researches on the internet, and found that they are listed under 6 axis IMU. The problem is I want the following specs, but don't know any piece that can fit the requirements: 1- very small (.4 mm * .4mm*.9mm) 2- does not need any programming, and ready to extract the data of motion directly. 3- Can deliver the data to an Arduino wirelessly. Kindly, I believe that you have the experience that qualify you to help me

Best Regards

 

[GPG]

I don't think you are going to find one that small.
https://www.xsens.com/products/mti-...lrLezCFBEXskrLQWEQt6RbCqOWzqusxNEcaAu3j8P8HAQ

 

[Peter010]

Thank you mate. I am checking the site. Ufortunatly,it does not have branches in UK !

 

[Peter010]

Kindly, what does g means in the context:

The MMA8452Q has user selectable full scales of ±2g/±4g/±8g

?

 

[davenn]

g = acceleration due to earth's gravity = 9.81 m/s²


(dang @Ian ... I thought we had sub and super script here as click on buttons ?? ... any chance in adding it please )



Dave

 

[Peter010]

Cheers.

 

[Old Steve]

g = acceleration due to earth's gravity = 9.81 m/s²

(dang @Ian ... I thought we had sub and super script here as click on buttons ?? ... any chance in adding it please )

Dave

I'll second the request for subscript and superscript buttons if it's at all possible. I'm forever doing it _m ^a _n ^u _a ^l _l ^y.

Edit: Strike-through would be nice, too. It can be used to good effect sometimes.

 

[davenn]

Edit: Strike-through would be nice, too. It can be used to good effect sometimes.

strikethrough is in the list ..... look under the insert dropdown icon,

 

[Old Steve]

strikethrough is in the list ..... look under the insert dropdown icon,

Thanks Dave, I'd never noticed it. I always do that the hard way too. (And I use code tags regularly, so I should have seen it. )