I've seen it work, hell it's so easy to build anyone
can try it for themselves..
Believe it or not John Searl invented that what looks to me like the
most successful version I have jet seen described. It's quite ironic,
Searl doesn't want to share how his flying saucer powers it self and
how it flies but he DID explain his inertial propulsion system. The
flying saucer contains flywheels the outer one containing what he
calls plungers. The plungers attached to the outer ring spin around
along with the flywheel at great speed. The wheel is obviously well
balanced, homogeneous and symmetrically. In order to accelerate the
levitating craft a plunger is released which immediately bounces back
in line restoring the symmetry. This of course delivers a tremendous
linear blow. If so desired another plunger is released. It can thus
therefor keep on accelerating indefinitely with the structural
strength being the only limitation presented onto the rate of
acceleration thereof. Searl calculated it capable of reaching the moon
within an hour. This of course strongly depends on the validity of his
fuelless engine. He has been trying to bring it to the market since
1960 and was imprisoned for not paying tax over self-made electricity.
When he was released his tools and prototype had been sold as scrap
metal, all his paperwork was gone even his photos and news articles.
The trial didn't prove anything, John confessed he was guilty of the
accusation under the false impression it would finally revolutionise
the world. The court was all to happy to lock him away. Not uncommon
for free energy inventors. But, Searl makes lots of unbelievable
claims, if it wasn't for his inertial propulsion drive I would have
just ignored him. I decided to look over his claims and attempt to
validate the weirdest of all. This was his claim people would cure
faster when standing close to the generator. Now he already claimed
free energy, magnetomechanical levitation, cheap DEEP space travel AND
inertial propulsion. It seemed to me this medical claim of his was not
going to do his credibility any good. From the interviews I concluded
he really believed it was true. So I investigated the claim then I
discovered the world of electromedicine. Apparently an over decorated
professor with heaps of honorary degrees had already invented radio
medicine in early 1900.
http://video.google.com/videoplay?docid=-3807238317495330586
http://www.rife.org/
From this point on I was unable to pin Searl's medical claims on John
Searl. Royal Raymond Rife had already invented the cure for all
diseases 50 years earlier. Rife was paved with diplomas and free
funding.
"The end of all diseases"
http://www.rense.com/general31/rife.htm
Anyway, Searl's generator apparently uses the same power source as
viruses do. Here is a short rundown on last years events.
24 April 2007
Prof. Searl and his backer met with a solicitor and with patent
officials. One of them was a scientist whose task was to certify if
the invention can be marketed. The meeting concluded with a positive
confirmation from the officials that this invention can be so
marketed.
11 June 2007
From Israel and Malta, Prof. Searl's guests are Engineers in the field
of rocket and solar energy systems. They have taken the first steps
towards producing the SEG from their respective countries.
Thanks to the commitment of our team members and supporters of this
project, we can now confirm that the four material layers needed to
construct the first SEG Plate has now been realized as shown within
this image. The precision machining of these materials will be within
10 microns and it is expected to take up 3 months to complete. Note
that each ring layer has an individual electronic function, working
all together to form a unique solid state magnetic diode.
15 June 2007
Professor John R. R. Searl is honored to receive for the second year
in a row, the 2007 Loris Hemlof Prize for Best Free Energy Technology
along with a contribution of £500 pounds sterling.
This award was considered among over 100+ energy technologies listed
by Loris Erik Kent Hemlof home page at:
http://www.users.on.net/~lekh/
25 June 2007
Prof. John Searl has accepted the invitation to Thailand and an
agreement has been reached. Thailand will become the first
international country to start the development and manufacturing of
the Searl Effect Technology.
The acquisition of production equipment has already started in
Thailand.
23 July 2007
Prof. Searl is invited by Mirco to inspect their factory in Italy for
the purpose of manufactuing the S.E.G layers and he was handed the
following document;
With the precious help of Prof. John Roy Robert Searl realizing in
Italy the S.E.G. to create a system of energy at a very low cost free
and non-polluting for the continuation of the human race.
Prof. Searl has announced that Italy is now joining this R&D program
as of this date.
02 Oct 2007
Some of Prof. Searl’s team members are testing the external induction
for tapping energy out of the SEG Mockup. This is yet another core
principle of the SEG concept that can now be tested and evaluated.
03 October 2007
The Copper Emitter and the Magnetic layer of the SEG prototype are now
pressed together. Notice the teflon block beneath, it will be machined
later to form the Gate. We truely hoped to be further along with it,
but so much of our efforts has shifted towards the preparations of the
new lab facilities now that this project is funded; this will indeed
speed up our progress for the long run.
13 October 2007
The three set of SEG copper emitters have arrived in their basic
sizes. The Searl team will mill of each ring carefully since it
requires greater precision than the supplier can provide.
This marks the day all four-component layers are set as one complete
unit.
This is the first of three sets needed to complete the SEG
experimental prototype scheduled for 2008.
Here is a bit more recent news coverage
http://www.searlsolution.com/media.html
Here he describes his inertial propulsion drive.
http://video.google.com/videoplay?docid=-8635897559220353909
Yes it is an old man talking about the past lol For 50 years he is
running around in the same circle. Today the materials he needs are
not commonly available anymore. So he is building a factory in
Thailand right now. Here is a proof of concept contraption in an
attempt to get a patent.
It would all sound like a media parade if it wasn't that by V. V.
Roschin and S. M. Godin had reviewed the technology after which they
got in big trouble with the Russian Academy of Science, in Moscow.
http://www.rexresearch.com/roschin/roschin.htm
Poor Russian academics put all this effort in hiding the technologies
then those 2 jokes disclose everything. I'm looking forwards to seeing
his factory go into production. Thailand seems to be a perfect choice.
I cant imagine the CIA sending their assassins there, it's practically
in China. lol Perhaps the overly corrupt Australian government is
interested in suppressing it. Here is a page I baked earlier.
http://magnetmotor.go-here.nl/john-searl/
Oh, I almost forgot Keith.
http://www.datelinehollywood.com/dateline_hollywood/harrison_ford/
Harrison Ford starring in 'The 65 Year Old Virgin'!!!!
This photo of Harrison Ford from Access Hollywood is from the set of
his new movie "The 65 Year Old Virgin," which is a sequel to the
successful "The 40 Year Old Virgin." As you can see, they're doing
that hilarious chest waxing scene again. We can't get enough of that.
Ohhh? Look how exiting? The 65 year old virgin! Will you imagine that
one! EXTRA!! - EXTRA!! - READ ALL ABOUT IT!!
_____
http://blog.360.yahoo.com/factuurexpress
