How to process my GPR's data effectively?

[[email protected]]

I am a beginner in ground penetrating radar detecting, and I
want to process my data well, so I can get a satisfactory
interpretation.
I used Malå RAMAC shielded antenna and X3M corder unit. The data
processing software is ReflexW.
Do you also used it? Do you have some good advice on data
processing? Do you have some experiences? and could you please tell it
to me.

 

[Vladimir Vassilevsky]

I am a beginner in ground penetrating radar detecting, and I
want to process my data well, so I can get a satisfactory
interpretation.

Forget about it. GPR does not work.

I used Malå RAMAC shielded antenna and X3M corder unit. The data
processing software is ReflexW.
Do you also used it?

Yes once I did the mistake of being keen with this bad idea.

Do you have some good advice on data
processing? Do you have some experiences? and could you please tell it
to me.

The typical attenuation in the soil is at the order of 200dB per meter.
Thus it is not feasible to get any meaningfull result unless the object
is burried really shallow in the dry sand or something like that.


Vladimir Vassilevsky
DSP and Mixed Signal Design Consultant
http://www.abvolt.com