how to install a simulation model into proteus ISIS

[pragash]

1) can i import microprocessors IDE, BSDL Model or IBIS Model to proteus ISIS to simulate them? will it work?

2) is there any supplier giving proteus spice model to direct import to proteus library? if yes, please state the supplier name, model types and how to import them. thanks.

 

[CDRIVE]

This might best be answered by Proteus/Isis. Importing uC spice models is a lot more involved than other devices.

Chris

 

[pragash]

hi chris,
so it cannot be done by user?

 

[CDRIVE]

hi chris,
so it cannot be done by user?

Unfortunately I can't answer that definitively. My version of ISIS is a stripped down version called Picaxe VSM. It only handles Picaxe uCs and only simulates in live interactive mode.

Did you inquire with their tech support?

Chris

 

[CDRIVE]

I Googled "import microprocessors IDE, BSDL to isis proteus" and got lots of hits.
https://www.google.com/search?newwindow=1&site=&source=hp&q=import+IDE,+BSDL+Model+to+proteus+isis&oq=import+IDE,+BSDL+Model+to+proteus+isis&gs_l=hp.3...5121.27074.0.28524.25.25.0.0.0.0.1029.4197.0j10j5j1j7-1.17.0....0...1c.1.64.hp..22.3.590.0.oISKoyGvD0c

This was one of them..

http://www.labcenter.com/products/pcb/schematic_libraries.cfm
EDIT: Read this too!
http://www.electro-tech-online.com/threads/adding-i-mx233-model-into-proteus-isis.146787/
Chris

 

[ganavi]

how we add simulation module to newly created or imported microcontroller in proteus 8.8?