-
Categories
-
Platforms
-
Content
Hot air gun? What type?
mains or 24V?
Paint stripper type or hot air solder re-work type
Martin
mains or 24V?
Paint stripper type or hot air solder re-work type
Martin
Hi M,
Re-work type, as the fan is 24V it may be 24V, but I can check. The plugs are the aircraft type.
C
May be one of these will help.
Martin
Hi M,
Thaks.
I reverse engineered the new one I've bought, here: Femail
The one I'm replacing, has no plug/socket. I've now got to reverse engineer that and wire it the same as above.
My fear is, that I could buy a replacement, and it not being the same=POP.
C.
Attachments
If you give us more information on your unit, we may be able to help you further.
As you have seen, some have more connections than others.
But we're guessing as you have not supplied any info at all.
Martin
As you have seen, some have more connections than others.
But we're guessing as you have not supplied any info at all.
Martin
Hi M,
It's called Mark Ethan rework staion, but I don't think it is a genuin one, as the ones, I search for aren't like it, so no real information.
It appears that I'm going to have to open up new guns and check they are the same as the socket, I'm going to fit.
I wonder why the ones I've seen don't have hot airgun sockets?
C
I got a little lost and confused......
A soldering iron has the connector.
The heat gun has a tube. This hasn't got a connector.
Martin
A soldering iron has the connector.
The heat gun has a tube. This hasn't got a connector.
Martin
Hi M,
Easy done.
The station has a wire but not socket (I'm about to fit one)
The new gun, has a plug, and has the heater in the handle.
Once I get it all fitted, I may be able to check a new heatgun, by resistances on the plug, without taking it apart.
Cheers, Thanks for your help, C.
bertus
Moderator
Hello,
Do you also have a number of the station?
There seem to be many:
rework station "Mark Ethan "
Bertus
Do you also have a number of the station?
There seem to be many:
rework station "Mark Ethan "
Bertus
Sorry.....Missed that.
Attachments
bertus
Moderator
Hello,
Your station looks the same as this:
https://www.amazon.com/Soldering-Rework-Station-welder-YIHUA/dp/B01AOA9D3A
Following the number, I found this youtube:
Bertus
Your station looks the same as this:
https://www.amazon.com/Soldering-Rework-Station-welder-YIHUA/dp/B01AOA9D3A
Following the number, I found this youtube:
Bertus
Hi B,
That's the one!
I still have to reverse engineer the pinouts, unless anyone knows what they are?
C
