high turns ratio SMD transformer

[starfire]

Does anyone know of a source of SMD transformer to be used to transform a
low voltage (less than 3V) input to about 125 - 150V output? I'd like
something in the range of 1:70 to 1:100 turns ratio. I can control the
amplitude of the input. Google searches have been fruitless after several
days of searching.

The oscillator feeding this can be set to run at various frequencies but
I'll probably run
at about 200KHz.

The secondary needs less than about 20uA. I'm trying to keep overall system
power
low, also.

Any ideas of vendors to search would be appreciated. I've tried
Sprague-Goodman, Coilcraft, etc., but no one seems to have anything in this
high turns ratio.

Thanks.

Dave

 

[Boris Mohar]

Does anyone know of a source of SMD transformer to be used to transform a
low voltage (less than 3V) input to about 125 - 150V output? I'd like
something in the range of 1:70 to 1:100 turns ratio. I can control the
amplitude of the input. Google searches have been fruitless after several
days of searching.

The oscillator feeding this can be set to run at various frequencies but
I'll probably run
at about 200KHz.

The secondary needs less than about 20uA. I'm trying to keep overall system
power
low, also.

Any ideas of vendors to search would be appreciated. I've tried
Sprague-Goodman, Coilcraft, etc., but no one seems to have anything in this
high turns ratio.

Thanks.

Dave

http://www.picoelectronics.com/surface/pe004_5.htm



Regards,

Boris Mohar

Got Knock? - see:
Viatrack Printed Circuit Designs (among other things) http://www.viatrack.ca

 

[mike]

Does anyone know of a source of SMD transformer to be used to transform a
low voltage (less than 3V) input to about 125 - 150V output? I'd like
something in the range of 1:70 to 1:100 turns ratio. I can control the
amplitude of the input. Google searches have been fruitless after several
days of searching.

The oscillator feeding this can be set to run at various frequencies but
I'll probably run
at about 200KHz.

The secondary needs less than about 20uA. I'm trying to keep overall system
power
low, also.

Any ideas of vendors to search would be appreciated. I've tried
Sprague-Goodman, Coilcraft, etc., but no one seems to have anything in this
high turns ratio.

Thanks.

Dave

Might wanna consider a different circuit topology. Disclose your end goal.
mike

--
Return address is VALID but some sites block emails
with links. Delete this sig when replying.
..
Wanted, PCMCIA SCSI Card for HP m820 CDRW.
FS 500MHz Tek DSOscilloscope TDS540 Make Offer
Wanted, 12.1" LCD for Gateway Solo 5300. Samsung LT121SU-121
Wanted 12" LCD for Compaq Armada 7770MT.
Bunch of stuff For Sale and Wanted at the link below.
MAKE THE OBVIOUS CHANGES TO THE LINK
ht<removethis>tp://www.geocities.com/SiliconValley/Monitor/4710/

 

[starfire]

Thanks, I'll check it out.

Dave